Bulk or bagged sand · cubic yards, tons, bags

Sand calculator

Enter length, width and depth to calculate sand in cubic yards, US tons and bags. The preset is a published dry weight of 2,700 lb per cubic yard; change it to your supplier’s figure, and set the bag size to the yield printed on the bag.

1.35 tons per yard preset54 bags of 0.5 ft³ per yardWet sand ≈ +29%

Measure the area to cover

Area 1

Sand, dry · supplier reference · 100 lb/ft³ · 0% extra. No compaction adjustment.

Material & allowance Edit

Based on Austin Wholesale’s “about 2,700 pounds when dry” per cubic yard of concrete sand. The same page puts wet sand at about 3,200 lb. Source: Austin Wholesale Landscape Supply. No automatic compaction factor. Weights & sources.

Bag sizes & cost Optional

Use a supplier quote. Taxes, labor and compaction are not added automatically.

How much sand you need

LengthWidthDepth

Enter your dimensions to see cubic yards, tons and bags

Start with an example

The short answer

How much sand do I need?

A 12 × 12 ft paver patio, 1 in bedding needs 12 ft³, or 0.44 cubic yards, which is about 0.6 US tons at the Austin Wholesale Landscape Supply figure of 2,700 lb per cubic yard (1.35 tons per yard). The bag count uses 0.5 ft³ bags unless you change it under Bag sizes & cost.

Bagged sand

How many bags of sand are in a cubic yard?

Bags are sold by weight, but they fill by volume. The makers print a yield on some bags and not on others, and the same 50 lb can be half a cubic foot or more. Count by the yield where one is stated.

Bagged sand as the makers’ data sheets state it, and the bags in one cubic yard (27 ft³), rounded up
ProductStated yieldBags per yd³Implied lb/ft³
Sakrete Natural Play Sand, 50 lb6 sq. ft. × 1 in deep; “divide the cubic volume … by 0.5 cubic feet”54100
Sakrete Natural Play Sand, 60 lb7 sq. ft. × 1 in deep47102.86
Sakrete Commercial Sand, 50 lbapproximately 6 ft² at 1 in deep54100
Sakrete Multi Purpose Sand, 0.5 cu ft0.5 cu ft; yields 6 ft² at 1 in deep54—
Sakrete Mason Sand, 50 lbapproximately .6 ft³4583.33
Sakrete Mason Sand, 80 lbapproximately .8 ft³34100
QUIKRETE Washed Plaster Sand, 50 lbapproximately 0.6 cu ft4583.33
QUIKRETE All-Purpose Sand, 50 / 60 / 70 lbbag weights only; no yield on the data sheet——
QUIKRETE Premium Play Sand, 50 lbbag weight only; no yield on the data sheet——

Where the sheet gives only a weight, the calculator can count bags by weight instead: under Bag sizes & cost set “Bags sold by” to weight, enter the bag’s pounds, and it divides the order weight at your density.

The calculation

How to calculate sand

  1. Measure the area and set the depth.Length × width in feet, then the depth in inches: 1 inch of bedding under pavers, or the depth your plan gives.
  2. Use the weight of the sand you are buying.Published figures for a cubic yard run from 2,400 to 2,800 lb. Ask whether the yard weighs it dry or wet: wet sand weighs about 29% more.
  3. Count bags by the yield on the bag, not its weight.Divide cubic feet by the volume one bag yields: 54 bags of 0.5 ft³ make a cubic yard. A bag that prints only a weight has to be converted with a density first.

Rectangle · US measurements

Length × Width × Depth ÷ 324

Feet × feet × inches → cubic yards

Cubic yards × 2,700 ÷ 2,000

Cubic yards × lb/yd³ → US tons at the reference weight

Read the full calculation method ↗

Worked examples

Sand calculator examples

At 100 lb/ft³, before any allowance. Open one to load it into the calculator.

Quantities at the supplier reference
ProjectVolumeWeight
12 × 12 ft paver patio, 1 in bedding12 ft³ · 0.44 yd³0.6 US tons
30 × 4 ft paver walk, 1 in bedding10 ft³ · 0.37 yd³0.5 US tons
16 × 16 ft play area at 12 in256 ft³ · 9.48 yd³12.8 US tons

Bulk quantities

How much does a ton or a cubic yard of sand cover?

One US ton at 2,700 lb per cubic yard is 0.74 cubic yards (20 ft³).

At 2,700 lb per cubic yard, loose
DepthOne US ton coversTons for 100 ft²
1 in
paver bedding layer, ICPI
240 ft²0.42 tons
2 in
upper end, Quikrete paver sand
120 ft²0.83 tons
12 in
play area, 9 in after settling (CPSC)
20 ft²5 tons
Cross-section of one US ton of sand at 2,700 pounds per cubic yard spread at 1, 2, 12 inches deep: at 1 inch it covers about 240 square feet, and at 12 inches about 20 square feet, so the deeper layer covers less ground.
Each layer is the same US ton of sand; its width is the area covered at that depth.

Why the density matters

How much does a yard of sand weigh?

One cubic yard of sand weighs 2,400 to 2,800 lb (1.2 to 1.4 US tons) across the published figures below, and 2,700 lb (1.35 US tons) at the calculator’s preset.

Weight per cubic yard as published by Austin Wholesale Landscape Supply, Anchorage Sand & Gravel, Roseville Landscape Material Supply, Fanelli Landscape Supply, Kalamazoo Landscape Supplies, Lasalle Sand & Gravel and LandCare Stone
ProductPublisherlb per yd³Tons per yd³
Concrete Sand (dry)Austin Wholesale Landscape Supply2,7001.35
Mason Sand / Multi-Purpose SandAnchorage Sand & Gravel2,4001.2
Mason SandRoseville Landscape Material Supply2,8001.4
Concrete SandAnchorage Sand & Gravel2,6001.3
Concrete Sand C-33Fanelli Landscape Supply2,7001.35
Fill SandKalamazoo Landscape Supplies2,7001.35
Washed Play SandKalamazoo Landscape Supplies2,7001.35
Wash sandLasalle Sand & Gravel2,5001.25
All Purpose SandLandCare Stone2,8001.4
Bedding SandLandCare Stone2,8001.4
Construction Sand (2NS), sold for under patiosKalamazoo Landscape Supplies2,8001.4
Class E Bedding SandAnchorage Sand & Gravel2,8001.4

Enter your supplier’s figure under Material & allowance. For gravel in general, see how much a yard of gravel weighs, which lists each supplier weight per yard in our ledger with its source and recorded date.

Moisture

Dry, damp or wet: how water changes a yard of sand

Sand holds water between its grains, and the water is weighed with it. Caterpillar’s earthwork tables give three conditions, loose as hauled and “bank” as it lies in the ground.

Sand weight per cubic yard by condition, from Caterpillar’s earthwork tables
ConditionLoose lb/yd³Bank lb/yd³Loose yd³ per US ton
Dry, loose2,4002,7000.83
Damp2,8503,2000.7
Wet3,1003,5000.65

A ton of wet sand is 0.65 loose yards; a ton of dry sand is 0.83. If the yard sells by the ton, ask how wet the pile is, or order by the yard.

Depth

How deep to lay sand, by job

Sand depths the standards and makers publish
JobDepthSource
Bedding sand under pavers1 in, screeded, not compactedInterlocking Concrete Pavement Institute
QUIKRETE paver base sand1–2 inQUIKRETE
Sand under play equipment9 in after settling; install 12 inUS Consumer Product Safety Commission

Bedding sand is screeded, not compacted; the pavers are vibrated into it. Quikrete’s 1–2 in is its own product’s instruction. For the gravel layer under the sand, use the paver base calculator.

Before you order

Frequently asked questions about sand

How many tons are in a cubic yard of sand?

Between 1.2 and 1.4 US tons (2,400 to 2,800 lb) in the 12 supplier figures on this page. Caterpillar’s earthwork tables put dry loose sand at 2,400 lb and wet sand at 3,100 lb.

How many cubic yards are in a ton of sand?

0.74 cubic yards at the 2,700 lb preset. It depends on the water in the pile: 0.83 yards for dry loose sand and 0.65 for wet, at Caterpillar’s weights.

How much does a 50 lb bag of sand cover?

Sakrete prints 6 square feet at 1 inch deep for its 50 lb play sand and its commercial sand: half a cubic foot. At 2 inches the same bag covers 3 square feet.

Does wet sand weigh more than dry sand?

Yes. Caterpillar lists a loose cubic yard at 2,400 lb dry and 3,100 lb wet, 29% more. Austin Wholesale Landscape Supply gives 2,700 lb dry and 3,200 lb wet for its concrete sand. When you buy by the ton, wet sand gives you fewer yards.

How much sand do I need under pavers?

A 1 inch bedding layer: 8.33 ft³, or 0.31 cubic yards, for every 100 ft² of paving. The gravel base below it is a separate order; the paver base calculator sizes both layers.

For suppliers and site owners

Add this sand calculator to your website

Selling or delivering sand? Let customers work out how much to order before they call for a quote. Paste the snippet below into any page; the calculator loads from Site Measure with the same preset as this page, needs no maintenance and stays free. A credit link is appreciated but optional; you may mark it nofollow or remove it.

Open it on your own figures (optional)

Leave these blank to use this page’s sourced preset. The figures are stored in the snippet itself; Site Measure keeps no account or record of them.

The frame is 760px tall and fills the width of its container. Preview the widget, or contact us if you need metric units or another change.

References

  1. Concrete Sand (dry): 2,700 lb/yd³, Austin Wholesale Landscape Supply. Recorded November 11, 2026
  2. Mason Sand / Multi-Purpose Sand: 2,400 lb/yd³, Anchorage Sand & Gravel. Recorded November 11, 2026
  3. Mason Sand: 1.4 US tons/yd³, Roseville Landscape Material Supply. Recorded November 11, 2026
  4. Concrete Sand: 2,600 lb/yd³, Anchorage Sand & Gravel. Recorded November 11, 2026
  5. Concrete Sand C-33: 100 lb/ft³, Fanelli Landscape Supply. Recorded November 11, 2026
  6. Fill Sand: 2,700 lb/yd³, Kalamazoo Landscape Supplies. Recorded November 11, 2026
  7. Washed Play Sand: 2,700 lb/yd³, Kalamazoo Landscape Supplies. Recorded November 11, 2026
  8. Wash sand: 2,500 lb/yd³, Lasalle Sand & Gravel. Recorded November 11, 2026
  9. All Purpose Sand: 2,800 lb/yd³, LandCare Stone. Recorded November 11, 2026
  10. Bedding Sand: 2,800 lb/yd³, LandCare Stone. Recorded November 11, 2026
  11. Construction Sand (2NS), sold for under patios: 2,800 lb/yd³, Kalamazoo Landscape Supplies. Recorded November 11, 2026
  12. Class E Bedding Sand: 2,800 lb/yd³, Anchorage Sand & Gravel. Recorded November 11, 2026
  13. Patio Paver Sands No. 1150-49 / 1150-59 data sheet, QUIKRETE
  14. Sand & Gravel Products data sheet (rev. November 2020), QUIKRETE
  15. Earthwork volumes reference tables, Caterpillar
  16. Public Playground Safety Handbook, Publication 325, Table 2, US Consumer Product Safety Commission
  17. Tech Spec 2: Construction of Interlocking Concrete Pavements (revised February 2020; dealer-hosted copy), Interlocking Concrete Pavement Institute
  18. Sakrete Natural Play Sand, 50 lb, Sakrete
  19. Sakrete Commercial Sand, 50 lb, Sakrete
  20. Sakrete Multi Purpose Sand, 0.5 cu ft, Sakrete
  21. Sakrete Mason Sand, 50 lb, Sakrete
  22. QUIKRETE Washed Plaster Sand, 50 lb, QUIKRETE

About these calculations

Every figure on this page links to its source; recorded dates are shown with the figures or in the gravel weight and price ledgers, and the arithmetic is covered by automated tests. The 2,700 lb per cubic yard preset is Austin Wholesale Landscape Supply’s published dry weight for its concrete sand. Moisture figures come from Caterpillar’s earthwork tables; bag yields from the makers’ data sheets, read November 11, 2026. How we source and calculate · Report an error