Mulch · cubic yards, bags and depth
Mulch calculator
Enter length, width and depth to calculate mulch in cubic yards and in 2 ft³ bags. Bed depths come from extension guidance and playground depths from the CPSC handbook; volume does not depend on what the mulch weighs.
How much mulch you need
Enter your dimensions to see cubic yards, tons and bags
The short answer
How much mulch do I need?
A 20 × 4 ft flower bed, 3 in deep needs 20 ft³, or 0.74 cubic yards, which is about 0.37 US tons at the Earth Haulers figure of 1,000 lb per cubic yard (0.5 tons per yard). In bags that is 10 of 2 ft³; 13.5 of them make a cubic yard.
Bags
How many bags of mulch are in a cubic yard?
13.5 bags of 2 ft³, because a cubic yard is 27 ft³. Mulch Mound rounds it to “about 13 of the standard two cubic foot bags” (Mulch Mound). Bag sizes are printed in cubic feet; use the one on your bag.
| Bag size | Bags per yd³ | 100 ft² at 2 in | 100 ft² at 3 in |
|---|---|---|---|
| 1.5 ft³ | 18 | 12 | 17 |
| 2 ft³ | 13.5 | 9 | 13 |
| 3 ft³ | 9 | 6 | 9 |
The calculation
How to calculate mulch
- Measure the bed and pick the depth.Length × width in feet, then the depth in inches: 2 to 3 inches suits most beds, organic mulch should not go past 3, and shallow-rooted shrubs such as boxwood take no more than 1.
- Topping up? Enter only the missing depth.Old mulch still counts. Measure what is left and enter the difference, so the total stays within the depth above.
- Convert to cubic yards.Square feet × inches ÷ 324 gives cubic yards, the unit bulk mulch is sold in.
- Or count the bags.Cubic yards × 27 ÷ the cubic feet printed on the bag. With 2 ft³ bags that is 13.5 bags per yard; the calculator opens on that size.
Rectangle · US measurements
Length × Width × Depth ÷ 324
Feet × feet × inches → cubic yards
Cubic yards × 1,000 ÷ 2,000
Cubic yards × lb/yd³ → US tons at the reference weight
Read the full calculation method ↗Worked examples
Mulch calculator examples
At 37.04 lb/ft³, before any allowance. Open one to load it into the calculator. The calculator also counts 2 ft³ bags for each.
| Project | Volume | Weight |
|---|---|---|
| 20 × 4 ft flower bed, 3 in deep | 20 ft³ · 0.74 yd³ | 0.37 US tons |
| 50 × 6 ft border, 2 in deep | 50 ft³ · 1.85 yd³ | 0.93 US tons |
| 20 × 15 ft play area, 12 in deep | 300 ft³ · 11.11 yd³ | 5.56 US tons |
Bulk quantities
How much does a cubic yard of mulch cover?
A cubic yard is 27 ft³, so it covers 324 ft² one inch deep. Divide 324 by the depth in inches: 162 ft² at 2 inches, 108 ft² at 3. The weight does not change the answer.
| Depth | One cubic yard covers | Cubic yards for 100 ft² |
|---|---|---|
| 1 in shallow-rooted plants, maximum (UMD) | 324 ft² | 0.31 yd³ |
| 2 in most beds, low end (LSU AgCenter) | 162 ft² | 0.62 yd³ |
| 3 in most beds, upper end and organic maximum (LSU, UMD) | 108 ft² | 0.93 yd³ |
| 12 in playground, installed for 9 in compressed (CPSC) | 27 ft² | 3.7 yd³ |
Why the density matters
How much does a yard of mulch weigh?
One cubic yard of mulch weighs 1,000 lb (0.5 US tons) in the one published figure below, which the calculator uses as its preset. Suppliers publish mulch at 400 to 800 lb a yard (C&H Landscape Materials; Mulch Mound, for dry mulch, heavier after rain), so the preset is the heavy end: the safer figure when you load a trailer or a pickup.
| Product | Publisher | lb per yd³ | Tons per yd³ |
|---|---|---|---|
| Mulch | Earth Haulers | 1,000 | 0.5 |
Enter your supplier’s figure under Material & allowance. For soil under a new bed, see the dirt and topsoil calculator; for stone instead of mulch, the landscape rock calculator.
Depth
How deep should mulch be?
- Most beds: 2 to 3 inches (LSU AgCenter).
- Upper limit: organic mulch should not exceed 3 inches, counting what is already there (University of Maryland Extension).
- Shallow-rooted shrubs such as boxwood: no more than 1 inch (University of Maryland Extension).
- Around trunks and stems: leave 2 to 3 inches bare (LSU AgCenter; Maryland says about 3). A cone of mulch against the trunk, the “mulch volcano”, keeps bark wet.
- Along the house: stop at least 6 to 12 inches from the foundation (LSU AgCenter).
LSU AgCenter’s own check: 100 ft² at 3 inches takes 25 ft³, a little under a cubic yard. The calculator gives 25 ft³.
Playgrounds
How deep should playground mulch be?
The CPSC handbook gives depths after the mulch has compressed. Loose fill compresses at least 25% with use and weather, so 9 inches needs about 12 inches when it goes in. The 20 × 15 ft play area example takes 11.11 cubic yards at that depth.
| Material | Compressed depth | Protects to a fall of |
|---|---|---|
| Wood mulch (not CCA-treated) | 9 in | 7 ft |
| Wood chips | 9 in | 10 ft |
CPSC: never use less than 9 inches of loose fill except shredded rubber, and keep it topped up under swings and at slide exits. Engineered wood fiber and rubber mulch should be tested to ASTM F1292; this page sizes the order, not the safety rating.
Before you order
Frequently asked questions about mulch
How many cubic feet are in a yard of mulch?
27. A cubic yard is 3 ft × 3 ft × 3 ft whatever the material, so a yard of mulch is 13.5 bags of 2 ft³ or 9 bags of 3 ft³.
How much area does a 2 cubic foot bag of mulch cover?
12 ft² at 2 inches and 8 ft² at 3 inches: the bag's 2 ft³ divided by the depth in feet. A 100 ft² bed at 3 inches takes 13 bags.
Should old mulch be removed before adding new mulch?
Not necessarily, but it counts toward the depth. University of Maryland Extension says organic mulch should only be replaced as needed to keep its original depth and should not exceed 3 inches; over time it can build up to five, six or more inches and cause plant problems. LSU AgCenter says to reapply when only a couple of inches are left.
How far should mulch be kept from trees and the house?
Keep it 2 to 3 inches from tree trunks and shrub stems, and at least 6 to 12 inches from the foundation (LSU AgCenter). Mulch piled against bark keeps it wet, which invites decay, disease and voles (University of Maryland Extension).
Can any wood mulch be used under a playground?
No. The CPSC handbook says wood mulch made from CCA-treated wood should not be used, and mulch whose CCA content is unknown should be avoided. Engineered wood fiber should meet ASTM F2075. Whatever the wood, it needs at least 9 inches after it compresses.
References
- Mulch: 1,000 lb/yd³, Earth Haulers. Recorded November 15, 2026
- Help: typical weight per cubic yard, C&H Landscape Materials
- Questions & answers, Mulch Mound
- Mulch in Moderation: Avoid Too Much (or Misplaced) Mulch, as Well as Miserly Mulching, LSU AgCenter
- Excess Mulch Problems, University of Maryland Extension
- Public Playground Safety Handbook, Pub. 325 (November 2010), Table 2, U.S. Consumer Product Safety Commission
About these calculations
Every figure on this page links to its source; recorded dates are shown with the figures or in the gravel weight and price ledgers, and the arithmetic is covered by automated tests. The 1,000 lb per cubic yard preset is Earth Haulers’ loading figure, the heavy end of what suppliers publish; cubic yards and bag counts do not depend on it. Depths are extension and CPSC guidance, not measurements. How we source and calculate · Report an error